Scroll down

HOW TO TAKE AN APARTMENT AFTER REPAIR CORRECTLY?

How much has merged in this sound for everyone’s heart … Let’s start this article with paraphrased words of the classic. So, the long-awaited renovation is over and you can’t wait to move into the freshly renovated housing. Wait a little more. The last stage remains – the acceptance of repairs from the builders. If you skip this step and trust the experts, you may not be pleasantly surprised later.

HOW TO ACCEPT AN APARTMENT AFTER REPAIR?

In order to legally accept an apartment after renovation, you must have an agreement concluded with the company or team that did the renovation for you. Otherwise, neither you nor your workers are protected by law. You need to take the apartment together with the foreman of the repair team. Let’s look at all the aspects that need to be checked in stages. It is worth noting that you need to take a clean apartment, with the cleaning done after the repair.

POINT ONE. CHECKING THE FLOORS.

Check whether the floors are even, how the floor coverings are laid, how even the joints are, how the skirting boards are laid. Check the floor coverings for cracks and chips that may have occurred during the repair process.

POINT TWO. ELECTRICAL CHECK.

Check the performance of all sockets in the apartment, underfloor heating, all lighting fixtures. Check the operation of the Smart Home system (if installed), the operation of radiators and other systems powered by electricity.

POINT THREE. INSPECTION OF SANITARY EQUIPMENT.

Check all hot and cold water faucets, plumbing work, check if pipes are leaking. Ask your neighbors if moisture is leaking to them.

POINT FOUR. VENTILATION AND SEWERAGE.

When accepting an apartment after repair, ventilation and sewerage must be checked, because. during repairs, they may become clogged. Flush the toilet several times, let the water run in the bathroom, sinks. See how fast the water goes. To check the operation of ventilation, bring a match to the hood. The flame must move towards the hood.

POINT FIVE. WALL CHECK.

Carefully examine the wallpaper and tiles on the walls: how tightly the wallpaper adheres to the walls, are the joints visible, are there any bubbles, are the seams between the tiles neatly made.

POINT SIX. CHECKING DOORS AND WINDOWS.

Check the correct installation of interior and exterior doors and windows. Doors must be installed evenly, must not creak or touch the floor, and when opened, the door must maintain its position. There should be no gaps between the window and the window opening. Mounting foam should not stick out anywhere.

POINT SEVEN. CHECK THE DESIGN PROJECT.

If the work was carried out in accordance with the apartment design project, then the result obtained must fully comply with it. All deficiencies identified during the inspection must be recorded and required to be eliminated. If your property was damaged during the repair (for example, a piece of a bathroom broke off), then the workers must supply you with a new bathroom of a similar model and cost, and also install it at their own expense.

Поделиться:
Pin Share

Order a design project

Order a free calculation

Free designer consultation

Заказать бесплатный просчет